Feeds:
Posts
Comments

Archive for December, 2011

CLICK HERE

Sunday mornings… services begin at 11 o’clock central (end at 1 o’clock central)

11:00 to 11:30   prerecorded scriptural study and insight

11:30 to 12:00   prayer, music, and communion

12:00 to 1:00     prerecorded sermon

Read Full Post »

Pamphlet… “Death Penalty for Homosexuals is Prescribed in the Bible” by Peter J. Peters…

www.sfawcart.com

Read Full Post »

Links…

————————————————————-

Home…

sfaw.org

Contact page…

sfaw.org

————————————————————-

sfawbn.com

(or .org)

Read Full Post »

Book by C.A. Weisman “Who Is Esau-Edom”

www.seek-info.com

Read Full Post »

Feedback…

on google…

sfaw.wordpress.com (this blog)

www.google.com

on Altavista…

www.yahoo.com

on Bing…

www.bing.com

Related posts…

Ways of accessing posts on sfaw…

At a glance…

Read Full Post »

(1 megawatt E-Cat system)

1 MW E-Cat Cold Fusion Device Test Successful

pesn.com

Related…

www.forbes.com

On October 28, 2011, Andrea Rossi demonstrated his 1 megawatt E-Cat system to his first customer, who had engineers/scientists on hand to test/validate its performance. Due to a glitch, it provided 479 kW of continuous power for 5.5 hours during the self-sustained mode.

Here I am with Andrea Ross after the test of the 1 MW E-Cat plant in the background.

Full Disclosure:
I am seeking a business relationship with Andrea Rossi.
My trip was sponsored by Farlie Paynter of Canada, as well as by Mike Spitzauer, CEO of Green Power Inc (GPI), the Waste-to-Diesel Fuel company in Pasco, Washington.

By Sterling D. Allan (who was present), with Hank Mills
Pure Energy Systems News

Well, the big day has come and gone. Andrea Rossi’s one-megawatt-capable E-Cat cold fusion device has been tested in Bologna, Italy; and the unknown customer, who ran the test, is apparently happy.

There were some issues, so it couldn’t be run at full power in self-looped mode, but what it did do was plenty impressive.

It ran for 5.5 hours producing 479 kW, while in self-looped mode. That means no substantial external energy was required to make it run, because it kept itself running, even while producing an excess of nearly half a megawatt. Rossi explained the reasons for this in the presentation he gave, which I videotaped and will be posting later.

That’s half the rated capacity, but it is still a major accomplishment for the device that was completed earlier this week — the first of its kind on the planet.

Early in the day with a glitch showing up, Rossi said that they had to make a decision about whether to go for 1 MW output, not in self-sustain mode, or with self-sustain mode at a lower power level.  The customer opted to go for the self-sustain mode. Nothing was said about the prospects of a follow-up test, though I would imagine that the customer will be running many tests to understand this gadget they have purchased, and that information will be conveyed to Rossi.

When I asked him during the Q&A session if the customer was satisfied with the test, Rossi responded, “Yes, I think they are satisfied.”

Here is a brief video excerpt highlight from Rossi during his 1-hour reading of the public report from the customer, followed by a question and answer session.  I recorded the entire presentation, and we’ll post that tomorrow, hopefully along with a transcription.  Half the time was in Italian, as he would address each item in Italian as well as English.

In this excerpt, Rossi responds to the question, “So, is this a breakthrough?”

Here’s a transcription of the excerpt video:

Mister [Paolo] Soglia has asked me if I think that the test of today is a breakthrough. I think yes, because I think today we have seen enough. No more small five or ten kilowatt units, but now we have overcame the difficulties connected with the basic engineering to make something that….  You know, to go in self sustain mode and make 400 [actually 479] kilowatt hours per hour… To understand that this is a breakthrough…

You can also think that hundreds of millions of dollars have been spent to try to have a COP [coefficient of performance] of 1.1 with nuclear fusion. Today we have made a theoretically endless COP making 470 kilowatt hour per hour of completely free energy, free of fuel. Yes, I think this is a breakthrough.

Of course this is the first step, but it is a very important first step….

Early this year Andrea Rossi announced his plans to construct and test the world’s first one megawatt cold fusion plant. The plant would utilize his E-Cat (Energy Catalyzer) technology that utilizes tiny quantities of nickel powder and hydrogen gas as fuel, while producing large amounts of energy in the form of heat. Importantly, the energy is produced without emitting any pollution, utilizing any radioactive materials, or producing any nuclear waste. Simply put, the E-Cat offers the world a source of cheap, safe, and clean energy. Although the exact plans for the launch of the technology were adjusted a few times throughout the course of this year, October 28th, 2011 was settled on for the date of the official test of the one megawatt plant by the first customer.

These first plants will cost around $2,000 per kilowatt to build one at a time, but once they are mass produced, Rossi expects the price to drop to around $100 per kilowatt installed.

Attendance at this test was limited for several reasons. First, the customer does not wish to be known at this time, nor to have its test engineers/scientists identified. I did not inadvertently discover the customer’s identify, nor did I try to find out. I gave that group their space and did not probe. Second, the device is a nuclear device, and the regulations for a public demonstration are extremely stringent; so by making the event private, and only bringing one or two at a time to see it was a way to get around the safety requirements.

Most of us (around 30 guests total) arrived between 9 and 10 am; and by around 11 am, Rossi began taking people back to see the device while it was in operation, in self-sustained mode. Here’s a video I shot, with Rossi’s permission, during my 2-3 minute chance to see the unit during operation:

A neighboring facility, coincidentally, is named “Rossi”, which is a common name in Italy.

Here I am with Mats Lewan and other Swedish associates.

Here I am with Peter Svensson from the AP

Professor Levi, who was Rossi’s right-hand man today, will be heading the Bologna research on the E-Cat.

Power for start-up (resistive coils that provided heat to the reaction chambers) was provided by the large and loud genset (was making all the noise) you see that is nearly as large as the small shipping container in which the 1 MW E-Cat plant was arranged.  Once the reaction chambers got up to temperature, they were maintained by the heat produced by the reaction. I’m not sure why they kept the generator running after that, but I would guess it was for back-up or safety. I’m sure the engineers testing the system made sure what the power levels were at all times.

There were 100 E-Cat modules, each with 3 reaction chambers in them, for a total of 300 reaction chambers. An additional 20 or so units had been installed on the top of the shipping container, compared to the earlier photos and videos we had seen. Steam was produced by the units and exited through the back in the bottom of the two pipes. The steam was not put to use to run a load but the heat was dumped via two radiators, distilled, and circulated back into the system. When looking inside the plant, I noticed that one of the E-Cat units had a little steam escaping from the front of it.

The top pipe in the back, which was closed, was for emergency cool-down, if needed.

Each unit was run independently through a computerized control.  The input and output temperature readings were recorded by computer, and the data will be provided to us probably later this evening or tomorrow morning.  When I went by there, I think the input was measuring 19 C, and the output was 109 C.

Radiation measurements were taken by Dr. Bianchini David, from the University of Bologna. He said no extraneous radiation was detected at any time emanating from the reaction chambers, or from the piping, or from the water tanks, or in the vicinity of the apparatus. Apparently, gamma radiation is produced during the reaction, which is shielded by water, iron, lead, and a final coating on the apparatus. David said that he has not measured gamma radiation from the device, because he has not had access to the reaction chamber while it has been unshielded.

None of the units were taken apart following this test, as was the one back on the October 6 test. I asked Rossi whether any radio frequencies were used in the test, and he said “no”.

I would estimate that there were about 12 people assisting with the test arrangement, including: 3-4 security guards, 1 caterer, 2 receptionists who checked to make sure everyone was invited and wore the required badges, 3-4 engineers helping take measurements, Foccardi was helping take guests 1-2 at a time back to see the unit.

I especially enjoyed mingling with the other guests, including: Mats Lewan from NyTeknik; Irene Zreick from Focus.it; Peter Svensson, Technology Writer for the Associated Press, NY, who told me that the reason the mainstream press hasn’t been covering this is because Rossi has been very picky about who he lets in; Enrico Billi, a nuclear physicist and friend of Rossi’s, who is presently living in China and helping to open doors there for this technology; Professor Christos Stremmenos, from the University of Bologna, who told me all about his theory of how the technology works; Pierre Clauzon, nuclear engineering professor from France, who told me about several theoretical physicists trying to understand cold fusion in general and the E-Cat in particular; Uzikova Irina, a nuclear plant designer from Russia; Stefan Heglesson, representing a Swedish interest in the technology; Loris Ferrari, Associate Professor of Condensed Matter Physics from the University of Bologna, who will be one of the five professors to do the two year test of the E-Cat, which hopefully will be funded as a result of today’s test. They will study both the “how” and the “why” of the technology.

Mats and I agreed to post our stories at the same time. Peter was going to go first, having been given an exclusive by Rossi, but it’s going to be a few days before he gets the necessary info and editorial approvals before he’s able to run a story in the Associated Press.

Probably the biggest opening for skeptics will be the continually running genset that is probably rated for 500 kW (my guess), and appears to have been connected by cables to the E-Cat. “Where’s the mystery?” So knock yourselves out, skeptics. It’s the customer who has to be happy, and apparently this one was satisfied that those cables were not contributing to the 470 kW output during self-sustaining mode.

Here’s a video where Rossi talks to us briefly following the test, saying that a report will come shortly; and giving us the reason for why we couldn’t go back during the test except 1-2 at a time.

And here’s a video of a couple of 1 MW generators that were in the room where we were hanging out, which were from an earlier project Rossi was involved with, running on biofuel.

# # #

This story is also published at BeforeItsNews.

Update… Alleged history of suppression of cold fusion…

(mit president paul e. gray…)

The History of MIT’s Blatant Suppression of Cold Fusion

A stunning report written by the late Eugene Mallove details the efforts of professors, researchers, and even the former President of MIT to squash cold fusion at all costs. If you have any doubt that Pons and Fleischmann had enemies desperately trying to discredit them, this article will erase it!

pesn.com

By Hank Mills with Sterling D. Allan    Pure Energy Systems News    December 27, 2011

Due to the fact that commercially-ready cold fusion technologies like Andrea Rossi’s E-Cat (Energy Catalyzer) exist and can produce kilowatts of power, I’m not too interested in previous systems from years ago that could only produce a couple watts of power (or less). However, I am very interested in the events that took place immediately after the birth of Cold Fusion in 1989, when Pons and Fleischmann announced the existence of their technology to the world. Although cold fusion systems at the time were not ready for the market place, they proved the effect was real — a fact the establishment could not allow the public to accept.

Immediately after the announcement was made, the “mainstream” scientific community went on the attack. The late Eugene Mallove was in the middle of it, being employed at MIT in the news office — before resigning in protest of the institution’s misconduct. In a featured article for Infinite Energy Magazine, Mallove detailed exactly what took place that led to his resignation, and the depth of hatred that many professors at MIT had for Pons and Fleischmann’s work. The article titled, “MIT and Cold Fusion: A Special Report” also looks at how the replication performed by the institution’s Plasma Fusion Center actually did produce positive results, how data from the experiment was altered by unknown individuals at least twice, and how the hot fusion scientists in charge of such tests were far too biased to conduct proper research.

The article is the most detailed piece of documentation I have ever seen in regards to the early years of the war against cold fusion. If you think the suppression Pons and Fleischmann faced was bad, you don’t have a clue until you have read this article.

To start with, those in charge of the replication attempt were members of the MIT Plasma Fusion Center. Their work with hot fusion Tokamak brought the university many millions of dollars in funding from the government, and maintained their job security. If cold fusion were to be accepted as a real phenomenon, it could have made hot fusion research appear to be near worthless.

The question in the minds of representatives in Washington, DC would have been, “Why should the taxpayers finance the construction of giant reactors to experiment with hot fusion reactions that produce nuclear waste and lethal amounts of radioactivity, when cold fusion research only requires a small fraction of the funding, while producing no waste and little radioactivity?”

In the minds of the MIT professors, such as MIT Plasma Fusion Center Director Ronald R. Parker, that question could never be allowed to cross the minds of those that paid for their employment. So in an effort to belittle cold fusion research so no one would take it serious, the members of his department (including some scientists from others) took every opportunity they could to attack Pons and Fleischmann. For example, consider how…

A funeral party or “Wake for Cold Fusion” was held by the Plasma Fusion Center, before their replication test of Pons and Fleischmann’s setup was even complete. They held another such party afterwards.
Mugs belittling cold fusion were given out by Ron Parker, the head of the MIT hot fusion research group, who was supposed to be doing serious research to determine if cold fusion was a reality or not. The mugs read, “The Utah University: Department of Fusion Confusion” and had mocking instructions for cold fusion on the back.
Ron Parker would use the test results to discredit cold fusion, while at a celebration of the death of cold fusion stated to Eugene Mallove (after being shown evidence in support for cold fusion) stated that the data from the MIT replication was “worthless.”
How examination of the data from MIT’s replication showed obvious evidence of tampering. In fact, the corrected data showed excess heat. Yet it was still used to discredit cold fusion research for many years.
How the former President of MIT, Charles Vest, refused to order an investigation into how the Plasma Fusion Center handled the replication, and their obviously unscientific behavior — such as partying for the death of something instead of doing unbiased research. Even worse, years later he signed onto a Department of Energy report stating that cold fusion did not deserve funding for research, yet hot fusion deserved millions of additional dollars and was a “bargain.”
Conflicts of interest were ignored from the very start. For example, those who had the strongest need for cold fusion to be proven not to work (hot fusion scientists), were tasked with the replication of the effect. It would be like giving a cigarette company the order to conduct a study on the reality of lung cancer, or the lumber industry the job of determining the usefulness of industrial hemp. What the hot fusion scientists were going to say was obvious!
How some scientists were so closed minded they stated that if cold fusion was real, Pons and Fleischmann should be dead from radiation poisoning. In addition, some scientists went so far as to personally attack them. In one case, a scientist stated that even if a thousand tests showed excess heat, that the results would not vindicate Pons and Fleischmann.

“Words to Eat”
MIT Professor Ronald George Ballinger may hold the all time record for making a foolish statement against cold fusion. He wrote in 1991:

“It would not matter to me if a thousand other investigations were to subsequently perform experiments that see excess heat. These results may all be correct, but it would be an insult to these investigators to connect them with Pons and Fleischmann.”

Perhaps one of the most interesting aspects of the article is how Ronald R. Parker and Ronald G. Ballinger had a phone call with Nick Tate of the Boston Herald in 1989. They were talking to him about a potential story about cold fusion, hoping that he would write a hit piece. In their conversation, which is transcribed in the article, Parker uses the fraud word in his description of their work. He also talks about how he is setting up another “blast” against cold fusion with Bob Bazell, a reporter with NBC.

When Tate reported in the Boston Herald on May 1 that the MIT scientists had called Pons and Fleishmann’s work a “possible fraud” and “scientific schlock”, Pons and Fleishmann were viciously attacked at the meeting of the American Physical Society. In a retrospective piece written in 1991, Tate asserted that: “Some say those comments set the tone for the national criticism of the Utah work that followed.”

Meanwhile, when Tate’s article in the Boston Herald revealed that Parker had described Pons and Fleishmann’s work as being a “possible fraud” and “scientific schlock”, Parker rushed to deny he had made such statements. Probably, he realized that in his rush to discredit cold fusion he had crossed the line, and committed slander. In order to avoid possible legal repercussions, in a media advisory from the MIT News Office, Parker specifically denied making such assertions to Tate during their telephone conversation. However, Tate had recorded the phone call, and therefore had rock solid evidence that Parker had made those statements. Years later, Tate allowed Eugene Mallove to listen to the recording, which revealed the truth about what was said. It was too late, the damage to cold fusion’s reputation was done.

In summary, Mallove’s article paints a damning picture of MIT scientists and professors hell-bent on discrediting cold fusion. Out of desperation to protect hot fusion research, they went so far as to tell blatant lies, alter data, hurl personal insults, conduct celebrations of the “death” of cold fusion, and organize journalists to write hit pieces to try and dismiss Pons and Fleischmann’s work in the public eye. Then the leadership of MIT turned away and ignored the misconduct and potentially criminal behavior, even when they were specifically alerted to it. Years later, these same individuals (working in other positions with the DOE and DOD) continued to promote the idea that cold fusion was “garbage.”

If you want to know the TRUTH about why it has taken twenty plus years for a commercial cold fusion technology to be developed, you should read this article. It is a tragedy beyond measure that an institution like MIT would allow such inappropriate behavior. Everyone involved has blood on their hands from all the people on this planet that have died due to the suppression of this technology. Literally, due to their suppression of cold fusion, children have needlessly starved, millions have suffered dehydration due to a lack of clean water, the environment has been trashed, and the global economy has been almost destroyed.

If the suppression of cold fusion by MIT had never happened, we might not even have an energy crisis today!

And this is but one of many such stories about the suppression saga from 1989.

The suppression from back then has had phenomenal staying power due to the brainwashing that pronounced “cold fusion” to be “junk science,” no matter what, despite thousands of replications worldwide, with several making significant gains toward marketplace viability, and the E-Cat actually reaching the marketplace on October 28 of this year with a 1 MW unit. So now, when people attack Andrea Rossi’s E-Cat, it’s hard to tell whether they are acting as a function of that brainwashing, or as a present-day disinformation agent, or if they have honest misgivings of a scientific basis.

Gratefully, Rossi keeps moving forward despite these negative statements.

A few individuals in the mainstream are coming around and waking up to the reality of cold fusion, like NASA’s Dennis Bushnell who claims cold fusion is the number one most promising alternative energy technology on the planet. However, to protect hot fusion research, protect the status quo, and to keep the public from realizing how the scientific community suppressed cold fusion, he calls the phenomena LENR (Low Energy Nuclear Reactions). In addition, he claims there is no fusion in cold fusion, in order to try and make the technology seem more mundane, and more acceptable.

There were enemies of mankind in 1989 that wanted to prevent the proliferation of cold fusion, and there are still such enemies today. Reading about how cold fusion research was attacked from the very start can help us prepare for attacks from these in the future.

We cannot let greedy, selfish, and power-hungry monsters and their countless minions suppress cold fusion for another twenty years or more. There are too many lives at risk. Simply put, the future of our civilization is at stake.

Jude 1:16
These are grumblers, malcontents, following their own sinful desires; they are loud-mouthed boasters, showing favoritism to gain advantage

Read Full Post »

A green fire…

(in androssan, north ayrshire, scotland…)

Wind Turbine Explodes Into Flames

www.weather.com

By Nic Halverson    December 11, 2011

Discovery

Nothing is more emblematic of clean, renewable energy than the soothing blades of a wind turbine placidly turning in the breeze. Whenever I encounter a wind farm, I’m instantly calmed, dare I say hypnotized, by the tranquility.

So when one of these gentle green giants catches fire, like it did in the above photo, the image is jarring to say the least. Most jarring is that this seems to happen more than you might think.

Most recently this happened in Androssan, North Ayrshire, Scotland, an area recently hammered by winds up to 160 mph, compliments of a beastly Atlantic storm that clobbered northern parts of the U.K. early this week.

As you can see from this photo, the turbine exploded, spewing large pieces of flaming material on the ground below.

The windfarm’s operator, Infinis of Edinburgh, said the cause of the fire is not yet known and that the incident is under investigation.

It’s not entirely clear what went wrong (normally wind turbines shut down when winds reach 55 mile per hour), so the investigation will likely focus on that mechanism and possibly the gearbox, which controls rotor speed.

“As a standard precautionary measure, all Infinis staff vacate wind farms when wind speeds exceed 55 mph and therefore no one was present on site at the time of the incident,” Infinis explained in a press release.

As well, the site has been disconnected from the electricity grid until further notice.

Better design??? wind generator without the gearbox…

Direct drive generator… $0.04 per kilowatt hour

Related post…

Cold fusion power generator…

Read Full Post »

Older Posts »